How to Standardise the Operation of Industrial Annealing Furnaces
In the operation of industrial annealing furnaces, standardised procedures form the foundation.
Release Date:
2022-08-08
In the operation of industrial annealing furnaces, standardised procedures form the foundation. How, then, should one standardise the operation of industrial annealing furnaces, and what precautions should be observed during use?
Firstly, preparatory work must be completed. Before commencing the aluminium alloy quenching furnace, close all control cabinet doors and verify that door switches function reliably. Inspect control panel indicator lights for integrity and meticulously examine all grounding connections for damage. Unauthorised movement of equipment is strictly prohibited. Maintain a clean and tidy workspace at all times. Ensure proper arrangement, cleaning, and sanitation of both equipment and the working environment. Do not place corrosive substances inside the aluminium alloy quenching furnace for heating.
What should we pay attention to?
Connect the thermocouple leads ‘+ -’ to the terminals on the rear of the instrument; adjust the zero adjuster so that its pointer is at the ‘0’ position; switch on the power supply and set the temperature to the required level. Do not exceed the limit temperature when using the electric furnace. The induction coil within the equipment must be connected to water for 2-3 minutes before energising. Ensure the water source is clean to prevent blockages in the cooling pipes, which could cause overheating and damage the equipment. Water temperature should not exceed 45°C. If the water temperature becomes excessively high, operation must be suspended.
News Information
Official Website Mobile
Douyin Official Media
Weibo Official Media
WeChat Official Account
2022-02-26